Generally it should be either modern, commercially available computer hardware. The following list gives an overview of the recommended equipment:

QuickHMI-Editor

  • CPU: at least 1.6 GHz or higher
  • 64 bit operating system
  • RAM: at least 2 GB, recommended 4-8GB
  • Hard drive: at least 60 GB SATA2
  • Network: 100 Mbps
  • Graphics: 3D-capable graphics chip with DirectX 9.0 support. A 3D-capable graphics card with its own 512 MB graphics memory is recommended (shared memory is not recommended).

QuickHMI Standalone Runtime

  • CPU: at least 1.6 GHz or higher
  • 64 bit operating system
  • RAM: at least 2 GB, recommended 4-8GB
  • Hard drive: at least 60 GB SATA2
  • Network: 100 Mbps
  • Execution of the software on the Raspberry Pi from version 3 possible

QuickHMI Viewer (alternative, if not desired in the browser)

  • CPU: at least 1.6 GHz or higher
  • 64 bit operating system
  • RAM: at least 2 GB, recommended 4-8GB
  • Network: 100 Mbps
  • Graphics: 3D-capable graphics chip
  • Execution of the software on the Raspberry Pi from version 3 possible